[RP-PPPoE] PPPoE Plugin for PPPD

[Palasamudram, Chaitra (NSN - IN/Bangalore)]

Hi David,

Thanks for the reply. If I invoke on the normal Linux PC using command
./pppd pty 'pppoe -I eth1' it works. Please see below.

/usr/sbin # ./pppd pty 'pppoe -I eth1'
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/7

The real issue is that on the target where I want to execute the
rp=pppoe.so is not getting loaded. Hence my question is how to create
rp-pppoe.so for different target (using cross compiler), and make 'pppd'
on that target to run with 'pppoe' option like " ./pppd pty 'pppoe -I
eth1' ".


HOW TO CREATE rp-pppoe.so for different environment and how to link this
plugin with pppd for different environment.


Thanks
Chaitra 

-----Original Message-----
From: rp-pppoe-bounces at lists.roaringpenguin.com
[mailto:rp-pppoe-bounces at lists.roaringpenguin.com] On Behalf Of ext
David F. Skoll
Sent: Tuesday, June 26, 2012 9:23 PM
To: rp-pppoe at lists.roaringpenguin.com
Subject: Re: [RP-PPPoE] PPPoE Plugin for PPPD

On Tue, 26 Jun 2012 23:46:46 +0800
"Palasamudram, Chaitra (NSN - IN/Bangalore)"
<chaitra.palasamudram at nsn.com> wrote:

>          ./pppd /dev/ptyt0  './pppoe -I eth3'

I believe the SYNOPSIS section of "man pppoe" will show you where you
went wrong.

Regards,

David.
_______________________________________________
RP-PPPoE mailing list
RP-PPPoE at lists.roaringpenguin.com
http://lists.roaringpenguin.com/cgi-bin/mailman/listinfo/rp-pppoe