[RP-PPPoE] Req:Hints for mulitple pppoe-server instances

[hbreschner]

Hi,

So far so gut I launched the PPPoE server with the command line
"pppoe-server -C sandbox -L 192.168.121.254 -p /etc/ppp/ippool -m 1412 
-I eth1.10"
cat ippool says "192.168.121.1-100"

Well I changed the setup to let at least a single PPPoE Server catch the 
VLAN 10 tagged packages on either eth1 and eth1.10.
But the PPPoE server does to reply to them.
the VLAN devices are made with

"ip link add link eth1 name eth1.10 address 00:00:00:aa:bb:1a type macvlan".

Please can someone tell me what I am doing wrong?

Bests,
Heiko

On 06/04/2012 04:19 PM, Insane Laughing Clown wrote:
> [..]
> For each vlan you want to use, you need to set it up in advance on 
> your server. Typically, you have 1 ethernet port connected to your 
> switch which is in 'trunk' mode, and further you have used the 
> 802.1q/vlan support in linux to create 1 or more vlan interfaces, 
> which you can then run a pppoe server process on and support clients 
> on that interface. If you have a group of vlan interfaces which you 
> will serve the same services on, you could create a bridge and add 
> those interfaces to the bridge and then be running pppoe-server on 
> that bridge interface instead.
>
> -ILC
> ___